See picture,this is Open-loop to Closed-loop Conversion oscilloscope waveform,my motor startup failure at this moment. I need some advice how to optimize this waveform,Make this electromagnetic Angle ...

I have a problem with running my CLA CODE when I run my program in flash. When i run thise program in RAM, i don't have these problems. Problem description: CLA TASK1 is triggered by int 6.11 (SD1).

I read the result register for current measurement 1000 times. I found that I got negative value(unit: V), but it shouldn't be like this. here is our pin definition ...

I want to use LM74801 to power mux 2 batteries but also allow it to conduct reverse current from my load (motor). The DS states that LM74801 allows bi-directional current if the C pin is left ...

I am puzzled by an element of the filter design found in SNVA886: Reduce Conducted EMI in Automotive Buck Converter Applications. A 2k resistor (RF2) appears in parallel with the ferrite (LF2), and is ...

This thread has been locked. If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this ...

Is Motor Control GUI same as InstaSPIN Universal GUI. Also, In the webpage for C2000SDK Motor Control SDK mentions MOTOR-CONTROL-GUI and MCU-MOTOR-CONTROL-GUI. Is both the same? If not, what is the ...

I am facing an issue with balancing feature. I am trying to test external cell balancing via AFE through 0x0083 CB_ACTIVE_CELLS() command. It works in one hardware variant and not in other. What could ...

I am using the TMS570LC4357 development board. Currently, I can successfully run the TMS570LC43x_rtiBlinky_BL_APP20020.bin using the Hercules_Ethernet_Bootloader. However, when I load my own created ...

If you are wanting to configure a peripheral register as a DMA source or destination address, you want to use the "Manual" or "Variable/Function Name" options. Please see the explanation on the thread ...

We use your company's TPS27100 chip to test the load capacity with the output connected to the load. When ILIM is connected to the ground, the working environment temperature is 25 degrees Celsius and ...